The Renusol Cross-Rail Connector is used is pairs to attach perpendicular lengths of Renusol rail, or rail to TriSole frames.
A pair of Cross-Rail Connector are attached either side of the upper rail.
The upper rail should always be of 50mm x 37mm type because it has a small ridge along a third face to allow a connector to clamp on, whereas the 41 x 35 does not. Use any of the following rail partnos: (Silver) REN-500502, REN-500505 or (black) REN-400502-B, REN-400505-B.
Technical Data:
Dimensions: 35x35x65
Weight: 0.066kg
Set: complete pre-assembled set
Material: Aluminium; Corrosion resistant steel
Certification: TUV ID:48970; MCS012 IK0197
Useable with: VS+ mounting rail 50x37; TS+
Maximum Torque: 12,00 Nm
Driver: Hexagon socket 5mm
Renusol mounting equipment must not be used with mounting equipment from other suppliers. Doing so would inevitably void the warranty of the mounting system.
